BMW 2 Series Coupé G42 2021 Thundernight metallic three-quarter side view standing in front of a building



The key facts and figures on the BMW 2 Series Coupé at a glance: engines, consumption, CO2 emissions and dimensions. Check out all the performance data such as displacement, horsepower, torque and acceleration – and find out which engine best meets your needs.


Read more


Select model


Unladen weight EU in kg 1,765
Max. permissible weight in kg 2,165
Permitted load in kg 475
Permitted axle load front/rear in kg 1,090/1,160
Luggage capacity min. (seats up) in l 390
Luggage capacity max. (seats down) in l -
Trailer load (unbraked) in kg 750
Trailer load 8% (braked) in kg 1,600
Trailer load 12% (braked) in kg 1,600


Cylinders/valves 6/4
Capacity in ccm 2,998
Stroke/bore in mm 94.6/82.0
Engine power in kW (hp) at 1/min 285
Engine torque (Nm) at 1/min 500/1,900-5,000
Compression ratio : 1 10.2


Top speed in km/h 250
Acceleration 0–100 km/h in s 4.3

Fuel consumption

Combined in l/100 km 8.8-8.1
CO2 combined emissions in g/km 200-185
Tank capacity, approx. in l 52


Tyre dimensions front 225/40 R19 93 Y XL
Tyre dimensions rear 255/35 R19 96 Y XL
Wheel dimensions and material front 8 J x 19 inches, light-alloy
Wheel dimensions and material rear 8.5 J x 19 inches, light-alloy

BMW wheels and tyres EU tyre label close-up


We subject the tyres for our vehicles to stringent tests with up to 50 different quality criteria – significantly more than prescribed by the uniform tyre labelling regulation that applies throughout Europe. This is where you will find all the information on the properties of the tyres used at BMW.

Fuel consumption and CO2 emissions of the BMW 2 Series Coupé.

BMW M240i xDrive Coupé:
Fuel consumption in l/100 km (combined): 8.8–8.1
CO2 emissions in g/km (combined): 200–185

BMW 220i Coupé:
Fuel consumption in l/100 km (combined): 6.9–6.3
CO2 emissions in g/km (combined): 156–142

BMW 220d Coupé:
Fuel consumption in l/100 km (combined): 5.1–4.6
CO2 emissions in g/km (combined): 134-120

Official data on fuel consumption and CO2 emissions were determined in accordance with the mandatory measurement procedure and comply with Regulation (EU) 715/2007 valid at the time of type approval. WLTP values are used for assessing taxes and other vehicle-related charges, calculated and based on the new WLTP measurement procedure according since 01.01.2021. For more information on the WLTP and NEDC measurement procedures, see

Read more

Fuel consumption and CO2 emissions of the BMW 2 Series Coupé.

  • BMW M240i xDrive Coupé:
    Fuel consumption in l/100 km (combined): 8.8-8.1
    CO2 emissions in g/km (combined): 200-185

    The values of fuel consumptions, CO2 emissions and energy consumptions shown were determined according to the European Regulation (EC) 715/2007 in the version applicable at the time of type approval. The figures refer to a vehicle with basic configuration in Germany and the range shown considers optional equipment and the different size of wheels and tires available on the selected model.

    The CO2 efficiency specifications are determined according to Directive 1999/94/EC and the European Regulation in its current version applicable. The values shown are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle for the classification.

    When charging times are shown they can be affected by a number of factors such as type of charger, voltage supplied to the charger/car and type of current (AC or DC) supplied to the charger/car. The car also plays a role in charging times as it can be set by the driver to accept various different amperage and should preconditioning be used to heat or cool the vehicle while charging this will also affect the charging time.

    The basis for the calculation of the charging times for 100 km range is the electric consumption of the vehicle based on the use of a high-Powered Charging station (HPC) or charging type and current as indicted in the literature above. The testing procedure measures are based on a 23 degrees Celsius battery start and ambient temperature with certification values excluding additional auxiliary consuming devices and systems within the vehicle such as seat heating, displays, air conditioning.

    Individual consumption (fuel economy) may differ due to driving profile, vehicle load profile, auxiliary consumer usage, temperature, and ambient conditions. Consumption is based on WLTP or NEDC (whichever is indicated) best case conditions and is independently tested for BMW Group. If you are comparing this range with other models or brands make sure they are stating the same WLTP or NEDC testing regime. These results can be used to compare vehicles on a close to “like for like” basis but are unlikely to be achieved in real world conditions for reasons including temperature variation, driving conditions and the use of the auxiliary systems referred to above.

    Information provided and images displayed on this site include overseas models and may show some features not available in New Zealand. Please contact an authorised BMW dealer for specific information on vehicles and features available in New Zealand. Product changes may have been made since production of this content.